Replacement membrane for reverse osmosis drinking water housings. Dow Filmtec finest membranes delivers pure home drinking water. Fits standard housings.
Fits: Home Master, HydroGardener, Value Line and other reverse osmosis systems
Ultra-fine 0.001 micron pore size
Short leaf, rolled design. Non-chlorine tolerant
24, 50, & 100gpd Home Master, Dow Filmtec brand
150 gpd HydroGardener, CSM brand
Harder water; 75gpd, fits all Home Master RO
Also Fits:
APEC ROES-50
iSpring RCC7 - Select 75GPD
Express Water 5 Stage
APEC ROES-PH75 - Select 75GPD
iSpring RCC7AK-UV - Select 75GPD
APEC RO-PERM
APEC ROES-UV75 - Select 75GPD
iSpring RCC1UP - Select 100GPD
DOW FILMTEC™ reverse osmosis (RO) membranes for home drinking water treatment units are some of the finest, most reliable and consistent elements in the industry. Advanced membrane technology and automated fabrication allow Dow to precisely produce each and every element to tight, well defined specifications. Dow’s advanced and consistent RO element quality helps customers develop, and maintain brand recognition along with a reputation for building systems that reliably provide low impurity drinking water. DOW FILMTEC elements are shipped dry for convenient handling and long shelf-life.
Dow’s next generation elements are a fully compatible replacement for existing DOW FILMTEC™ residential RO elements.
Permeate Flow Rate (gpd )
Stabilized Salt Rejection (%)
Minimum Salt Rejection (%)
24, 50, or 100
98.0
96.0
Permeate flow rate and salt rejection based on the following conditions: 250 ppm softened tap water, 77°F (25°C), 50 psig (3.4 bar) and 15% recovery.
Permeate flows for individual elements may vary +/-20%.
Product specifications may vary slightly as improvements are implemented.
Replacement membrane for reverse osmosis drinking water housings. Dow Filmtec finest membranes delivers pure home drinking water. Fits standard housings.
Operating conditions:
Feed water: PSI 40 - 100 PSI
Feed water Temperature: 40˚ - 100˚(F) Max.
Total Dissolved Solids (TDS): 2000 ppm
pH limits: 4 - 10
* Your results may vary depending on regular maintenance, general condition of unit, and initial water condition.
Filter not designed to treat microbially unsafe or non-potable water without adequate disinfection before and after unit.