Remove arsenic in drinking water with our arsenic water filter. Replacement filters ideal for applications with arsenic at ppb of 80%. Fits standard housings.
Provides effective Arsenic+5 reduction. ResinTech’s ASM-10-HP Arsenic selective media has unsurpassed capacity and is effective over the entire pH range of potable water. This Arsenic+5 removal filter is an ideal choice for point of use applications requiring EPA compliance of less than 10 ppb of Arsenic+5.
This ResinTech ASM-10-HP Filter has modest capacity for arsenite (As+3). It is suggested that if the arsenite concentration exceeds 20% of the total arsenic present, the feed water should be pre-chlorinated to ensure conversion to arsenate (As+5). If you are on a chlorinated city water supply or well water where the the Arsenic is 80% As+5, then this is an excellent arsenic filter choice.
Highlights:
Size: 9 7/8"h x 2.75"d
Fits: Value Line, standard 10" housings
Capacity: 2,000 gallons
ResinTech ASM-10-HP Arsenic5 Selective media
Media NSF/ANSI-61 Certified
Sonic Welded Construction
Lot Traceability
Made in the USA of FDA Approved Materials
Operating Conditions:
40-90psi; 40°F - 100°F
pH 6-8
Flow Rate: 0.25 gpm - 0.5gpm max
Arsenic5 < 50ppb
Sulfate < 100ppm
Phosphate < 5 ppm
Chlorine <0.3 ppm
Turbidity <5 NTU
Silica < 10 ppm
Service life depending on conditions.
For use with potable water. Do not use without adequate disinfection before and after unit.
Remove arsenic in drinking water with our arsenic water filter. Replacement filters ideal for applications with arsenic at ppb of 80%. Fits standard housings.